ftp user manual

In the next steps of New Task Wizard, you need to verify restoration details, specify different options, and name the task. These steps are common for all restore tasks, and are not specific to the plug-in. For more details, see Restore Task. User Manual contents Download User Manual V8 Who uses our backup software. All rights reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or any means electronic or mechanical, including photocopying and recording for any purpose other than the purchaser’s personal use without written permission of AceBIT GmbH.WISE-FTP can connect to any valid FTP site and it is not bound to a specific server operating system. To use WISE-FTP you need no in-depth knowledge of how the FTP protocol works. Its comprehensive functionality makes WISE-FTP an ideal tool for webmasters who regularly update their sites or have to perform file transfers. You can use drag-and-dock to rearrange the layout to suit your preference, hide panels or have them float. The first set is stored in a personal folder, giving each user on a shared PC a personal set of FTP servers. You may schedule transfers directly from the main program. In addition to this basic functionality, WISE-FTP provides many powerful functions you need for your everyday work. It is used to transfer files from server to client (download), from client to server (upload) or between two servers, controlled by the client. In addition, FTP allows creating directories and reading directory contents as well as renaming or deleting directories and files. FTP uses separate connections for control and transfer: An FTP session is initiated by the client's establishing a TCP connection to the control port of the server (the default port for this being port 21). Via this connection, commands are sent to the server. The server replies to each command with a status code, which is often appended with an explanatory text.

• ftp user manual, cerberus ftp user manual, ftp user manual, ftp user manual download, ftp user manual free, ftp user manual software, ftp user manual downloads, ftp user manual online, ftp user manual template, ftp user manual user, ftp user manual 2017.

A user can utilize these configurable plug-ins for saving data from an FTP server, to an FTP server, or for restoring data from a FTP vault. They have no attributes. Files correspond to common files on the FTP, SFTP or FTPS server. Supported attributes: file size, modification time. To learn about virtual file systems and file and folder attributes, please see Plug-in File Systems. Destination selection is made on the third step of the New Task Wizard (see Select Destination for more details). To select an FTP, SFTP or FTPS as a target destination, follow these steps: In the Storage Destinations pane to the left, select FTP, SFTP or FTPS. The list of configurations appears in the Folder Selection pane to the right. The Settings dialog will appear. In the Settings dialog, fill in the fields, and then click OK. Learn more about FTP configuration, SFTP configuration or FTPS configuration. Select a folder of the FTP, SFTP or FTPS server, and then click Next. All next steps are common for all backup tasks (not specific to the plug-in). To learn more, please see Backup Task. Select Backup Task, and then click Next. In the Data Sources pane to the left, click onto FTP, SFTP or FTPS in the FTP group. In the Settings dialog, fill in server and authorization parameters, and then click OK. When finished selection, click OK. Selected data appears in the Backup Set pane of the New Task Wizard. Next steps of New Task Wizard are common for all backup tasks, and are not specific to the plug-in. Please see Backup Task for more details. Select Restore task, and then click Next. In the Storage Destinations pane to the left, select FTP, SFTP or FTPS. The list of your FTP configurations will appear in the Index File Selection pane to the right. The Settings dialog appears. In the Settings dialog, specify server address, user and password, and then click OK. Browse for the index file ( backup.hbi ) located in the destination folder on your FTP, SFTP server. Select it, and then click Next.

If such a message is not received by the FTPS server, the server will drop the connection. Fingerprints Since SSH architecture does not recognize certificates and has no other way to check whether the remote server is really the server you are expecting to be connected to, your decision to accept the connection or not is based solely on trust. You normally use SSH as follows: if you have connected to a remote server once and you are sure that this is the server you wish to connect to, you should save fingerprint information locally. Fingerprint information is unique for different servers and is generated by the server's private key. 10 User Manual WISE-FTP 9 What is an FTP server. Such a host is a networked computer which can run one or more servers. This is why host computers are often referred to as servers in colloquial language. A server is a program waiting to be contacted by a client program such as WISE-FTP in order to exchange information. If you are logged onto such a server and you cannot find what you are looking for, search for files with names such as readme, readme.txt, index, or 00index. Such files usually contain important information about the files available on the server. FTP sites are usually public sites. You may simply log in with the user name anonymous and enter your e-mail address as your password. Password-protected servers allow users to upload files themselves for use by others. This is how websites can easily be updated and expanded. What is an IP address. An IP address is a unique identifier that defines the location of a computer on the Internet. It also includes information about the service provider and the location of the server. There are two types of IPs currently in use: the old IPv4 and the new IPv6. IPv4 addresses are 32-bit addresses composed of four separate numbers from 1 to 255, separated by dots (.). IPv6 addresses are 128 bit addresses composed of blocks of numbers and letters, separated by a colon (:).

Most commands, however, will only be accepted after successful authentication. Separate TCP connections are used to send and receive files and to transfer directory listings for each operation. FTP knows two modes for establishing those connections: active mode and passive mode. Since FTP is a text-based protocol, data as well as authentication information is transferred as plain text without encryption. Thus, FTP should not be used for confidential data and file transfers that exceed the range of anonymous FTP use. Alternative solutions addressing this issue include, among others, Secure File Transfer Protocol (Secure FTP), Secure Copy (SCP), and SSH File Transfer Protocol (SFTP). What is SFTP? The SSH File Transfer Protocol or SFTP is a network protocol that provides file transfer and manipulation functionality over any reliable data stream. In WISE-FTP it is used with the SSH-2 protocol to provide secure file transfer, but is intended to be usable with other protocols as well. The SFTP Protocol provides secure file transfer functionality over any reliable data stream. It is the standard file transfer protocol used with the SSH2 protocol. WISE-FTP implements the client side of this protocol, which is reliable and easy to use. The SFTP protocol is primarily designed to provide file transfers, but is can also be used for more general file system access on the remote server. The SFTP protocol runs on a secure channel, which means that passwords and file information are not exposed to the network in plain text. NOTE: A common misconception is that SFTP is simply FTP run over SSH; in fact it is a new protocol designed from the ground up by the IETF working group. It can also be easily confused with Simple File Transfer Protocol (SFTP). What is FTPS (FTP over SSL). If a client does not request security, the FTPS server can either allow the client to continue insecure or refuse the connection. Implicit Negotiation is not allowed with implicit FTPS configurations.

After having created an FTP site, you can now connect to a server. To do so, proceed as follows: 1. Click the Connect button, or select Connect from the File menu. 2. In the Site Manager dialog box that opens, select an existing server or create a new FTP site. 3. Then click Connect to establish the connection to the selected server. 4. Details about your connection will appear in the FTP Log window. Learn more about how to transfer files or folders. Create new FTP site To create a new site proceed as follows: 1. Click Connect in the tool bar (a green 'turn on' icon) or choose Site Manager from the Tools menu to open the Site Manager dialog box. 2. Click New Site. 3. Enter a unique name for the respective site in the Profile name field. 4. Then enter a Server address and Port. In most cases, however, you can leave this field blank. 6. Enter your user name in the Username field as given by your provider. If you wish to log in as a guest, enter anonymous. Please note that the user name is usually case sensitive. 7. Enter your password in the Password fields as given by your provider. This entry is case-sensitive, too. If you have chosen anonymous as user name, simply enter your email address in this field. 13 Working with WISE-FTP 8. In the Connection type field, you can choose either FTP, SFTP, FTPS or FTPES. If you choose one of the latter, the Advanced.This folder will be displayed when connecting to this server. 11. Check the Synchronized browsing box if you want to synchronize the folders you are currently opening on the local system and the remote system. For example: When you have the same folders structure of remote system and local system and switch to another folder on the local system, the according folder on the remote system will automatically be opened. Note: Please ensure to enter a Home directory and a Local directory which have the same directory structure to be able to use Synchronized Browsing. 12.

Since most users find it easier to remember names than numbers, IP addresses are usually mapped to a special host name. WISE-FTP accepts IP addresses as well as host names. 11 Getting started Main window All important WISE-FTP features can be accessed directly from the main window via the toolbar.You will be directed to the ordering page, where you can order WISE-FTP. 3. After successfully ordering WISE-FTP, you will receive an e-mail with your unlock code. (This will happen within seconds if you pay via credit card.) 4. As soon as you have received your unlock code vial e-mail, click on Unlock Now (Step 2) in the Order and unlock WISE-FTP dialog box, and follow the instructions by the Wizard to unlock the program as a full version.Update Manager The Update Manager enables you to keep your software up-to-date at all times. Update Manager automatically checks via the Internet whether a newer version of WISE-FTP is available. Use this command regularly to ensure that you are always working with the most current version. If you have problems, make sure no antivirus software or firewalls that may stop Update Manager from connecting to the Internet are active. If the problems persist, download product updates manually from the WISE-FTP website. From the File menu, select Update Manager to start the update. NOTE: Only free updates will be installed. 12 Working with WISE-FTP Connect to FTP site To connect to an FTP site, click the Connect button. The Site Manager dialog box will open, where you can enter a user name and password to log onto an FTP site. For servers that allow anonymous login, use anonymous as your user name and your e-mail address as your password. Such sites are normally used to share corporate information with other users or to manage websites. Contact your web space provider for the necessary login information. Before connecting, create a new server profile. To use an existing connection click Connect.

If it has, the file will be transferred in ASCII format. If not, or if no file extension is found, the file will be transferred in binary mode. You should choose this option as your default setting! 3. Now drag and drop the desired files to the target directories in the Remote System window on the right. NOTE: You can synchronize the contents of a local directory with the directory selected on the server using the Synchronize directories item located in the Transfer menu. In this case, only new or revised files will be uploaded. Files with the same name will be automatically overwritten. Transfer arrows The two arrows on the transfer panel (center) between the Local System and Remote System areas make it easy to upload and download. Use the arrow pointing down to download selected files or directories to your local system. If you click the right side of that button, you can choose from several options like Upload optimized for Web and Upload in encrypted state. Use the arrow pointing up to upload selected files or directories to the remote system. If you click the right side of that button, you can choose from several options including Download with mask and Download in decrypted state. 18 User Manual WISE-FTP 9 Queue All connections initiated by the user are listed under Transfer progress in the lower part of the main window until the connection is either successful or cancelled by the user. You can re-sort the individual columns by clicking on the titles. A second click undoes the re-sorting. Click on Transfer progress in the View menu to show or hide this section. In the Preferences dialog box under Connection and Transfer, you can specify the columns you want to display. FTP log The FTP protocol (File Transfer Protocol) serves as a communication interface between an FTP client (e. g., WISE-FTP on your local system) and an FTP server. Click here for further details. Transfer modes Files can be transferred in two different modes: ASCII or binary.

In auto mode, the transfer mode for listed file types is predefined. When Auto is deactivated, the file is transferred in the selected mode (binary or ASCII). Select the transfer mode of your choice in the Transfer menu. ASCII mode Use ASCII mode to transfer text files (e. g.,.txt,.html,.htm,.cgi). The end-of-line character depends on the computer configuration. Use ASCII mode to ensure end-of-line characters are decoded correctly. TIP: If you are sure that the local and remote systems are using the same operating system, you can disregard ASCII mode and always transfer in binary mode. CAUTION: Transferring a binary file in ASCII mode may damage the file. TIP: If you are sure that the local and remote systems are using the same operating system, you can transfer in binary mode exclusively. Transfer protocol The FTP protocol (File Transfer Protocol) serves as a communication interface between an FTP client (e. g., WISE-FTP on your local system) and an FTP server. Whenever the program runs, the log is displayed below the main menu bar. Select or unselect FTP Log in the View menu to show or hide the log. If you are interested in the way the protocol works or need to correct mistakes, you can save the log in a text file. The log window is cleared whenever the program starts; make sure you save the log before exiting WISE-FTP. To save the log, select Save log as text file from the Tools menu. Passive transfer In passive mode, the client initiates the connection to the server to avoid problems with firewalls. The first port contacts the server on port 21, but instead of then sending a PORT command and allowing the server to connect back to its data port, the client sends the PASV command. Using passive transfer When connecting to FTP sites, the connection to your computer (the client) is normally established by the site. However, some FTP sites allow a passive transfer, where your computer establishes the connection. WISE-FTP uses the passive mode by default.

Enable the Passive checkbox to allow passive transfer. 13. If you want to store a log and or statistics about connections, dowloads etc.You can see both statistics and the log by clicking the according option in the tool bar above this connection dialog. Click the Additional tab if you wish to define optional further settings: 1. Server Class: Select the class of your server. Disable the Use general proxy configuration checkbox to configure specific settings for this FTP site. SSL Settings WISE-FTP supports SSL (Secure Sockets Layer) and TLS (Transport Layer Security). These are encryption protocols for secure communication and data transfer from and to FTP servers. Working with WISE-FTP Certificate Information WISE-FTP supports SSL (Secure Sockets Layer) and TLS (Transport Layer Security). For the encryption and decryption of data transfers to secure FTP servers, you must use a certificate. SSH key pair generator You can create the key for an SFTP connection using the SSH key pair generator. NOTE: The advantage of using these key-based authentication systems is that you will be able to establish secure connections without having to manually type in a password in many cases. Site Manager Use the Site Manager to access and configure your FTP sites. This dialog window appears whenever you click Connect on the toolbar. To make changes to an existing site, select its name in the left part of the window and enter the changes in the right part. Click Save to save changes. You are asked to confirm the changes when you close the dialog box or connect to the site. Click Cancel to undo the changes. Quick connect Click the Quick Connect button on the toolbar to quickly and easily connect to an existing FTP site. Select the FTP server you want to connect to from the drop-down list in the dialog box that opens. You may also type in a new FTP address, in which case the login will be anonymous. Disconnect To disconnect from a remote system, click the Disconnect button.

Every client logged onto a remote system (e. g., WISE-FTP) reduces server performance - whether data is being transferred or not. Do not stay connected to a server longer than necessary (other users will appreciate it). Some servers disconnect you automatically after a certain period of time if the client sends no commands. WISE-FTP can be configured to disconnect after a certain idle time. Restore connection If a connection attempt has failed, the FTP server might be busy. WISE-FTP is able to retry the connection after a certain period of time. Open the Preferences dialog box and click on Connection and Transfer. Enter the desired value under Wait time before reconnecting (sec.). Anonymous login You usually log onto an FTP server by entering a user name and password. However, many sites offer a guest login option. Key in anonymous as your user name and your e-mail address as a password. FTP servers that support anonymous login usually allow users to download files to which there are no public access restrictions; e. g., shareware programs, image collections, help texts, etc. Another characteristic of such (public) servers is that although users may view and download files, they may not upload any files. 17 Working with WISE-FTP Transfer files or directories After you have established a connection to the server, you can start to transfer files or directories. 1. Select the files or directories you want to upload from the directory tree in the Local System window on the left. 2. Choose a transfer mode in the Transfer menu. You can select from the following modes of transfer: ASCII: You should use ASCII mode to transfer text files (e. g.,.txt,.html,.htm,.cgi). Binary: Image files, executable files or ZIP files (.bmp,.jpg,.exe,.zip) should always be transferred using binary mode. You should also use this mode when the file type is unknown or not registered by Windows. Auto: When this option is selected, the software checks to see if a file extension has been defined.

Always use passive mode for transfers from and to FTP sites that support this mode. Mask for download Use this form to download several files of the same file type from the current directory on the FTP server. Upload optimized for web With the option Upload optimized for Web you can significantly reduce the size of HTML, CSS and similar files before uploading them to a hosting server. That way your websites will load faster which improves the usability for visitors of your site. The content or quality of your files will not be affected. You find the option Upload optimized for Web if you click the right side of the transfer arrow for upload between the local and remote windows in the main screen of WISE-FTP. Manage files and folders Properties Clicking the Properties button opens the Properties dialog window, where you can view detailed file information; e. g., file attributes or read and write permissions. You may modify the access rights to files and directories on a UNIX FTP server, provided you have the necessary authorization. View file To view the contents of a file, select the file and click on the Quick View button or select the respective command from the context menu. The file content will be displayed, either by the internal viewer or by the Windows program registered for the file type. Do not hesitate to empty this folder at any time to free up disk space. Quick View This program feature enables you to view file contents. NOTE: All files that are viewed using Quick View are saved in the Quickview sub-directory in the WISE-FTP program directory. You can delete the contents of this directory to free up disk space at any time. Editor WISE-FTP provides an integrated editor very well suited for viewing and editing HTML and other text files. The editor is particularly helpful when you wish to apply minor changes to documents on a remote server.

Within the editor, you can toggle between two tabs identified by text labels at the bottom of the editor window, just over the status bar. The Preview tab displays the HTML document in an HTML browser. A special feature of the editor is the optional syntax highlighting which improves the readability of HTML documents. You can enable or disable syntax highlighting under Preferences: General. This can be useful for finding a particular file type of file in a directory that contains a large number of files. The filter settings allow you to choose either a particular type of file to show, or a particular type of file to hide. Sort files and folders Sort listed files and folders by clicking on the column titles (name, date, size). Click on the column titles, Name, Size or Date to sort the list according to the respective heading. Click again to return the original sort order. Move files When you move a file, WISE-FTP copies it to the target directory and deletes the original file from the source directory. You may move files between remote directories, if you have the necessary access rights. To move a file, select one of the following methods: 1. Select the file and drag-and-drop it to the target directory. The directory must be on the same server. 2. Right-click on the selected file and choose Move to.Select the directory to which you want to move the file. Move directories When you move a sub-directory, WISE-FTP copies it to the target directory and deletes the original sub-directory in the source directory. 23 Working with WISE-FTP You may move sub-directories between remote directories, if you have the necessary access rights. To move a sub-directory, proceed as follows: 1. Drag the sub-directory and drop (drag-and-drop) it into the target directory. The directory must be on the same server. Or: 2. Right-click the sub-directory you want to move and choose Move directory to.Select the directory to which you want to move the sub-directory.

Renaming files or directories Use the Rename button to change file or directory names on the local or remote system. This feature is only available for sites to which you have the necessary access rights. 1. Select the file or directory to be renamed. 2. From the Commands menu, select Rename. 3. Enter a new name and confirm by clicking OK. Delete files Proceed as follows to delete remote files (this feature is only available if you have the necessary access rights): 1. Select the item. 2. Then click the Delete button. Alternatively, you may use the context menu for this purpose: Right-click on the object to be deleted and choose Delete from the context menu. Deletion mask Use this form to delete several files of the same file type from the current directory on the FTP server. Select the Search directories option to search through all subdirectories and to delete matching files found there. Find file on FTP server This dialog window enables you to search for a file on the FTP server. The search results will be displayed in the Found files and folders dialog window. 24 User Manual WISE-FTP 9 Directory content Displays the contents of the active FTP directory as text so that you can copy or print the list, for example. Access rights for all files are also listed. To view the directory content, proceed as follows: 1. Select a directory on the ftp server. 2. Right-click on the selected directory to open the pop-up menu. 3. Select Directory content. Rename directory Renames directories on the local or the remote system. This feature is only available for sites to which you have the necessary access rights. 1. Select the directory to be renamed. 2. From the Commands menu, select Rename directory, or click the icon on the toolbar. 3. Enter a new name and confirm by clicking OK. Delete directory You may only delete directories on the FTP server if you have the necessary access rights. To delete a folder, proceed as follows: 1.

Select a directory and choose Delete Directory from the Commands menu. 2. If no folder has been selected when you click Delete Directory, you are prompted to enter a folder name. 25 Working with WISE-FTP If a folder contains files, you may only delete it if the Allow deletion of non-empty folders box under the Advanced tab in the Preferences dialog box has been checked. Delete directories containing files An empty directory may be deleted at any time. Do the following to delete a directory that is not empty: 1. Open the Preferences dialog box. 2. Select the Advanced tab. 3. Check the Allow deletion of non-empty directories box under Additional. Directory synchronization The Synchronize directories option enables you to synchronize directories on your local system with those on the remote system. This can be helpful if you have edited local files and you do not want to upload them individually. Enter the options for directory synchronization. These options enable you to synchronize local directories with those on the remote system. This is because the server uses the server date for uploaded files, which may be different from file's date. Mirroring The Mirror feature enables you to mirror your directories on either an FTP server or your local system. Select the appropriate setting: On FTP site or On local system. Drag-and-drop Use the well-known Windows drag-and-drop feature to transfer files and directories. Make sure drag-and-drop is enabled in the Preferences dialog box. Change file access rights on a UNIX server Select the file(s) you want changed. Access rights are defined by three digits; for example, 644 are the digits for the rights described above. The first digit represents the rights of the owner, the second the rights of group members and the third the rights of all other users. The three digits are used in the WISE-FTP log and by some system administrators and Internet providers.

The following table shows the rights that correspond to the respective digits. The third column gives possible values for owners, groups and other users as they are displayed in the ten-digit file list on a UNIX server. To view this file list, select Directory content. Selected right 1st, 2nd, or 3rd digit Rights as per file list None Execute Write Write, Execute Read Read, Execute Read, Write Read, Write, Execute 0 1 2 3 4 5 6 7 ---x -w-wx r-r-x rwrwx Manage sites Rename existing site Ideally, a site' s profile name describes its content and the topic. To rename an existing site, proceed as follows: 1. From the Tools menu, open Site Manager. 2. Select the site to be renamed. 3. Enter a new name under Profile name. Add comments to existing site Comments can be added to every existing FTP site. Create new directory for existing site 1. From the Tools menu, open Site Manager. 2. Click the down arrow beside New Site and select New directory from the drop-down menu. 3. Enter a name for a new directory. TIP: To create a new FTP site in a particular directory, make sure the directory is selected first. Administer and sort existing sites into different folders WISE-FTP allows you to sort existing sites into directories that have been assigned distinct names. This simplifies site management (especially as the number of saved sites increases over time). It may be helpful to arrange sites in directories according to different topics; e. g., one directory for sites offering free games, one for software updates, etc. From the Tools menu, open Site Manager. You may use drag-and-drop, as you would in Windows Explorer. Direct your mouse pointer to the desired object, then press and hold the left mouse button and drag the file to the desired directory. Delete existing site Delete existing sites as follows: 1. From the Tools menu, open Site Manager. 2. Select the site or directory to be removed and click the Delete icon.