ftr gold user manual

Before installing Recording Suite please ensure that the following requirements have been met:If you are part of a large organization,NOTE on Windows 10: Recording Suite can be installed on Windows 10—however it isYou will need to enable.NET Framework 3.5 before using. Recording Suite products.Video Capture Considerations. FTR Reporter supports the recording of four (4) simultaneous high-definition (HD) video streams,Additionally the software supports thePage 4FTR Gold Recording Suite. Video Devices. If you are considering purchasing a camera for video capture, use the following as a guide forIf you use aYou can only record standardVideo File Storage. FTR Reporter records video directly to the physical disk of the computer—compressed using H264Video file sizes can be very large.FTR Reporter can simultaneously recorded four (4) of these HD video inputs,NOTE: This storage range was generated using an IP camera, with varying frame rate andThe storage size is also affected byIMPORTANT: If you will archive HD recordings to a network drive, ensure you haveVideo capture settings are configurable within FTR Reporter, allowing you to balance recording qualityStarting the Installer. You will likely have opened this setup guide from the link in the install wizard—you can skip to theRecording Suite installation package. To Run the Installation Package:Browse to www.fortherecord.com for more information on obtaining FTR Gold Recording SuiteMounting an ISO File (below in this guide) if you need help to install from an ISO file.Suite installation folder (on the mounted drive). The contents of that folder will appear as shownPage 5FTR Gold Recording Suite. Using the Install Wizard. Once the installation package is started you will be presented with the Install Wizard. Follow each ofPage 6FTR Gold Recording Suite. TIP: You can close the start-up page at any time after starting installation.

• ftr gold user manual, ftr gold user manual pdf, ftr gold user manual download, ftr gold user manual 2017, ftr gold user manual free.

Create one here. Creators are allowed to post content they produce to the platform, so long as they comply with our policies. United Kingdom. Company number 10637289. Recording Suite. For more information visit www.fortherecord.com. FTR Gold Recording Suite. Setup Guide. Table of ContentsNew Licensing Model. 4Video Capture Considerations. 4. Starting the Installer. 5. Using the Install Wizard. 6Registering the Products. 11. Getting Help. 13. Uninstalling. 14. APPENDIX B - Enable.NET on Windows 10. 16. Page 2FTR Gold Recording Suite. Setup GuideWith FTR Reporter you can record courtroom hearings, interviews, conferences, or private meetingsYou can record up to 8 audio channels and 4 video streams—both audio andWith Reporter you canWith FTR Player you can play recordings that are stored using FTR’s proprietary file format (TRM), asFTR Player allows independentWith FTR Manager you can control your content, both during and after recording. You have access toFor more information on each product and the integration between products, refer to the user guidesUser guides are in PDF format, and will be available for download from. Single Installation Process. FTR Gold products now have a new, simplified install wizard. Instead of needing to choose whichYou can then use tools and functions from eachPage 3FTR Gold Recording Suite. New Licensing Model. FTR Gold Recording Suite has several important new features, and one of those is the introduction ofAdditionally, once you choose to register Recording Suite you will only need a single license key toA simple activation window will pop-up each day of the trial period,While installing the Recording Suite, you will have the opportunity to select a trial period or initiate theSee section Registering the Products (below in this guide) for more informationRead and follow each section in order to ensure that products are installed properly prior to use. Pre-requisites.

Your Registration ID must beOnce you receive the License key from FTR support, add it to theOnce the License key is verified, your software will be licensed for ongoingGetting Help. You can obtain help for any FTR product by pressing F1 on your keyboard while the product is open. Additionally you can refer to the user guide for each product for detailed in-use information. Page 13FTR Gold Recording Suite. Uninstalling. If your digital recording needs change, or if you eventually upgrade to a new version of Recording. Suite, you may need to uninstall the software. To Uninstall Recording Suite:Alternatively, Right-click the listed item and select. NOTE: All three (3) products will be uninstalled when you remove FTR Gold 5.7. IndividualIf you have removed FTR Gold Recording Suite, but still require FTR Player for recording playback, youVisit the FTR website atPage 14FTR Gold Recording Suite. An ISO file (or ISO image) is a digital storage file with.ISO file extension. These files have the benefit ofMany programs exist on the internet to allow you toIf Using Windows 8 or HigherOnce mounted, the contents of the ISO file appear as if a physical disk was inserted in an optical driveIf Using Windows 7Many ISO manipulation programs are available on the Internet,Once you can see the installation folder (as shownYou can uninstall the ISO tool once Recording. Suite has been installed. Page 15FTR Gold Recording Suite. APPENDIX B - Enable.NET on Windows 10. The.NET Framework is an integral part of the Windows OS and provides common functionality for. Windows applications to run as designed. FTR Gold products use.NET Framework 3.5—however thisIMPORTANT: FTR Recording Suite is currently undergoing extensive testing for use on. Windows 10—however the use of FTR Gold products on Windows 10 is presentlyTo Enable.NET using Control Panel. NOTE: Installing.NET Framework 3.5 using this method requires an internet connection.

Click the CloseBe sure to read the License Agreement before continuing withPage 7FTR Gold Recording Suite. Setup GuideUse the default name or type a new Location Name.Refer to supporting documentation for accompanying product FTR. Page 8FTR Gold Recording Suite. CAUTION: The name given to the remote-access group on your domain is not important,If the group name is changed on yourFTR products support VBA modules, enablingPage 9FTR Gold Recording Suite. NOTE: The progress bar will appear and reappear several times while the software isYou have installed Recording Suite 5.7 on your computer. Click Finish toDesktop Icons. In Windows 7, Windows 8 and Windows 8.1, three (3) program icons will be created on your WindowsDouble-click any of these icons to open the program. Page 10FTR Gold Recording Suite. Start Menu in Windows 7. If you have installed Recording Suite on Windows 7, Recording Suite program shortcuts are alsoSelect a program shortcut to open the program. Registering the Products. You will not need to register each product individually—one license key will unlock all three (3)NOTE: A license is needed per machine, so if you change to a new computer for RecordingThe first time you start any of the Recording Suite products after installation, a registration dialog boxStart the registration process. Page 11FTR Gold Recording Suite. To start a 14-day trial:The registration dialog box will close and you will be able to use Recording. Suite for a period of 2 weeks without registering. NOTE: The registration dialog box will pop-up each day when you open any Recording. Suite product. The window displays the number of days remaining in your trial period, andTo start the registration process:A text file named with your computer name is placed on your. Windows desktop.Page 12FTR Gold Recording Suite. Setup GuideNOTE: Activation of your software is not immediate.

If you are part of a large organization, your IT team may need to perform the installation of on your PC. Removing Old Versions Before starting the installation of any FTR Gold software, you must first uninstall any previous versions of the same software. As files and libraries are shared between old and new versions, you might create problems if old versions are removed after a new version is installed. If you encounter the message shown above, previous FTR Gold software has been found on your PC. NOTE: Even if no FTR product icons are visible on your Windows desktop, check Windows Control Panel for any software by FTR Pty Ltd uninstall that software before continuing the new install. Page 4 5 Video Capture Considerations FTR Reporter supports the recording of four (4) simultaneous high-definition (HD) video streams, synchronized and stored in a single file with recorded audio. Additionally, the software supports the use of both non-ip cameras (i.e. laptop webcam, USB camera) and IP cameras for video capture. Video Devices If you are considering purchasing a camera for video capture, use the following as a guide for selecting an appropriate device (or multiple devices): FTR Reporter can record simultaneous video streams only when using IP cameras. If you use a non-ip camera (webcam, USB camera, etc.), you can only record a single video stream. FTR Reporter can record HD video only when using IP cameras. You can only record standard resolution video (up to 640x480) from a non-ip camera. Video File Storage FTR Reporter records video directly to the physical disk of the computer compressed using H264 video encoding and archives the video stream to a location you specify during installation. Video file sizes can be very large. As an example, a single HD video recording can consume MB every 5 minutes. FTR Reporter can simultaneously record four (4) HD video inputs, so ensure that you have enough hard-drive storage space for your recording requirements.

At time of writing, Microsoft has not released a downloadable installer for.NET FrameworkPage 16FTR Gold Recording Suite. Setup GuideRestart yourPage 17. For more information visit User guides are in PDF format, and are available within each included FTR application, or from FTR Support website at support.fortherecord.com. Single Installation Process FTR Gold products now have a new, simplified install wizard. Instead of needing to choose which products or features you will need before installation, all core components for recording, control and playback are installed on the computer by default. You can then use tools and functions from each product to suit your needs. New Licensing Model FTR Gold is now installed using a trial license model. You will not need to license or register any of the products during installation. You can test the full functionality of each product for 14 days, ensuring that GOLD meets your needs before paying anything. Additionally, if you choose to purchase and activate the software, you will only need a single license key to activate all three (3) products. An activation window will appear each day of the trial period, allowing you to easily activate the products without needing to search for the registration page. Page 3 4 INSTALLATION This section of the guide outlines the preparation and installation steps for FTR Gold. Read and follow each section in order to ensure that products are installed properly prior to use. Pre-requisites Before installing please ensure that the following requirements have been met: 1. Windows PC running Windows 7, Windows 8.x or Windows Standard soundcard installed and configured on the PC. 3. If recording video, a compatible video capture device is installed and configured on the PC. See section Video Capture Considerations for information on video capture devices. 4. You are logged on to the PC with local Administrator rights.

Some sections will not be used immediately we suggest keeping a copy of this document with the recording PC as a reference. Opening Programs There are two (2) ways to start any of the FTR programs that are included in FTR GOLD Recording Suite: From the Windows desktop, using program icons Using the Windows Start menu (Windows 7 and Windows 10) Using Desktop Icons Three (3) program icons will be created on your Windows desktop after installing. Double-click any of these icons to open the program. Page 11 12 Start Menu in Windows 7 and Windows 10 If you have installed on Windows 7, program shortcuts are also placed in your Windows Start menu. Select a program shortcut to open the program. Registering Products You will not need to register each product individually one license key will unlock all three (3) products in the. WARNING: Registration of is a 2-step process, with a time gap in between each step. Ensure that you begin the first step before your trial period finishes to ensure continuous use of the software. The first time you start any of the products (and once per day during your trial period), a registration dialog box will appear, as shown below. You can initiate one of two (2) registration options using this dialog box: Start (or continue) a product trial Start the 2-step registration process Page 12 13 The registration dialog box will pop-up each day when you open any product, and only during your14-day trial period (if selected). To start the registration process: Step-1 1. Click Generate Registration ID, as shown below. A text file with your computer name is created on your Windows desktop. This file contains a registration ID specific to your PC. Page 13 14 2. In the registration dialog box, click Open the file to continue (in the green bar as shown below) the generated text file opens in notepad. Alternatively, you can find the text file on your desktop and open it. 3.

Follow the instructions within the text file to pay for your license and obtain your License key from FTR support. 4. Back in the Registration dialog box, click Cancel to continue using. NOTE: Your products are still unregistered at this stage. The generated text file (containing your registration ID) must be ed to FTR support once you receive a License Key from FTR Support for this PC, you can continue registration step-2. To complete the registration process: Step-2 5. Once you receive the License key from FTR support, restart any product the registration dialog box will display. Once the License key is verified, the registration dialog box will close and your software will be activated for ongoing use on this computer. Getting help with Licensing Only one license key is needed to activate all three (3) products, however one license is needed for each PC running. If your copy of must be moved to a new computer, your license can be transferred to the new PC. However you will need to repeat the registration process after is installed on the new PC. FTR Support at for assistance ask for help transferring a license to a new PC. Uninstalling If needs to be removed from a PC, or if you upgrade to a new version of FTR GOLD, you may need to uninstall the software. Alternatively, Right-click the listed item and select Uninstall. NOTE: All three (3) products will be uninstalled when you remove FTR Gold Recording Suite. Individual products cannot be separately uninstalled. If you have removed FTR Gold, but still require FTR Player for recording playback, you will need to separately download and install FTR Player. Visit the FTR website at to obtain FTR Player. An ISO image is loaded or mounted as an extra drive letter on your computer which appears below C:\ in your drives list (on your computer). Many programs exist on the internet to allow you to both create and read the contents of an ISO file. Mounting an ISO in Windows 8 or Higher: 1. Find the.

NOTE: This storage range was generated using an IP camera, with varying frame rate and video resolution settings (see Reporter video options). The storage size is also affected by other factors such as amount of ambient light, movement within the camera frame, etc. IMPORTANT: If you will archive HD recordings to a network drive, ensure you have adequate bandwidth for moving large files around on your network. Video capture settings are configurable within FTR Reporter, allowing you to balance recording quality with storage size. Refer to the FTR Reporter user guide for more information on video capture settings. Starting the Install Package You will likely have opened this setup guide from the link in the install wizard you can skip to the next section. If you are reading this information on printed pages, you will need to obtain and run the installation package. Page 5 6 To run the ISO Install Package: 1. Download or otherwise obtain the installation package, available as an ISO file. Browse to for more information on obtaining FTR Gold. 2. Mount the ISO file as a temporary removable drive on your computer. See Appendix A Mounting an ISO File (below in this guide) if you need help to install from an ISO file. 3. Using Windows Explorer, find and run the file setup.exe, which will be listed in the Recording Suite installation folder (on the mounted drive). The contents of that folder will appear as shown below. Using the Install Wizard Once the installation package is started you will be presented with the Install Wizard. Follow each of the steps in the wizard (and in this procedure) without skipping any step there are no optional steps during installation. Page 6 7 1. Start-up page. Use this page to view setup documentation, and to initiate the software installation on your computer. 2. Welcome page. Be sure to read the important notes in the message box before continuing with installation. 3. Software License page.

Be sure to read the License Agreement before continuing with installation. Click Accept to continue with installation. Page 7 8 4. Recording Destination page. This name becomes important when your organization has many locations all conducting recordings. Use the default name or type a new Location Name. c. Checkbox to Permit users to change Location name this is disabled by default. Page 8 9 5. Remote Access page. Disabled by default, this option is for organizations requiring remote activation of recordings, as well as other external monitoring functions. 6. If you enable Remote Access here, you will need to specify a group name on your network domain. That group of users will have access to recording functionality on your computer while you are running FTR Reporter. Refer to supporting documentation for accompanying product FTR Monitor for more information on remote recording and monitoring. CAUTION: The name given to the remote-access group on your domain is not important, however that group name must not change. If the group name is changed on your domain, you will need to reinstall for remote access to work again. 7. VB Editor page. Disabled by default, the checkbox shown below enables the VB Editor components within the products. FTR products support VBA modules, enabling the creation of advanced functionality and changing of standard program configuration (e.g. changing keyboard shortcuts). Page 9 10 8. Summary page. Check the selected options before clicking Next to start the copy of files. NOTE: The progress bar will appear and reappear several times while the software is being installed. The entire installation process should take between 1-3 minutes. 9. Installation is complete. You have installed 5.7 on your computer. Click Finish to restart your computer you should restart before using any of the products. Page 10 11 AFTER INSTALLATION This section outlines the steps that follow installation of.

iso file, and Right-click on the file. 2. Select Mount. 3. Browse to your drives list to view the contents. Once mounted, the contents of the ISO file appear as if a physical disk was inserted in an optical drive on your computer. See section Using the Install Wizard (above in this guide) once the installation folders are visible. Mounting an ISO in Windows 7: 1. Download an ISO mounting tool. Many ISO manipulation programs are available on the Internet, and a search in your browser for simple Windows ISO mounting or similar will return many free software options available for download. 2. After downloading an appropriate ISO mounting tool, install it on your PC. 3. Follow the instructions from the ISO application to mount the ISO containing the installation files. 4. Browse to your drives list to view the contents. Once you can see the installation folder (as shown above) the ISO tool has done what it needed to do. You can uninstall the ISO tool once has been installed. Page 17 18 APPENDIX B - Enable.NET on Windows 10 The.NET Framework is an integral part of the Windows OS and provides common functionality for Windows applications to run as designed. FTR Gold products use.net Framework 3.5 however this version of.net Framework is not automatically installed with Windows 10, and must be separately enabled in order to run FTR Gold applications. To Enable.NET using Control Panel NOTE: Installing.NET Framework 3.5 using this method requires an internet connection. At time of writing, Microsoft has not released a downloadable installer for.net Framework 3.5 for Windows 10 you will need to use the procedure below. 1. Press the Windows key and use the search bar to find and open Control Panel. 2. Once Control Panel is open, find and click Programs and Features. 3. Click on the link Turn Windows features on or off as shown below. 4. Tick the check-box beside.net Framework 3.5, as shown below. Click OK. Page 18 19 5.

If asked, click Yes to confirm the installation and follow the on-screen instructions. Restart your computer if prompted. Page 19 Concurrent Network License with Borrowing Domain Based Registration The installation of the Concurrent network version entails two parts: a) a server installation, In this lab, you will back up a computer registry. You will also perform a recovery of a computer registry. Next plug in the flash drive and double click The contents will be updated periodically Senior Systems Cloud Services 1 Cloud Services User Guide 2 Working In Your Cloud Environment 3 Cloud Profile Management Tool 6 How To Save Files 8 How To Quick Start HIKVISION disclaims All Rights Reserved Catalog No. DOC2138B Version 8.0 Proprietary and Confidential The information This guide will show you how to install and configure the Outlook Plugin on your desktop. The information in this publication is covered under Legal Notices for this product. 45098226 27 June 2011 WELCOME 3 WELCOME This Welcome There are three parts to the network version installation: 1. The installation The installation of STATISTICA Enterprise Server entails two parts: a) a server installation, and b) workstation installations on each of Network Installation 2015.1 Administrator Guide Version 2015 Copyright 2015 Sage Software, Inc. All rights The FESClient To check for more recent editions of this Published by Sage 2325 Dulles Corner Printing from Windows The information in this publication is covered under Legal Notices This manual applies to ivms-4500 (Android Tablet) mobile client software; please read it carefully The installation of STATISTICA Enterprise Small Business entails two parts: a) a server installation, and b) workstation installations WELCOME TO WINDOWS 7 After you log into your machine, the Professional and Corporate Editions Table of Contents Table of Contents Software Installation.

Even if the server PC has a static IP address, you may The information in this publication is covered under Legal Notices for this product. 45081979 04 February 2009 CONTENTS 3 CONTENTS Check the Echo360 documentation wiki for the most current version: From Version 4.1 to 4.5 Read the manual according to your purpose for using this product. Disc Guides with this symbol are PDF All rights reserved. Pro-Watch Network Utility can transfer videos in the camcorder to the computer via Wi-Fi (wireless LAN) instead of connecting Version 031809 CONTENTS 1. INTRODUCTION. 1 1.1 LAN PREREQUISITES. All rights reserved. Symantec, the Symantec Logo, the Checkmark Installation Guide. Version 10.4 All rights reserved. Parallels IP Holdings GmbH Vordergasse 59 8200 Schaffhausen Switzerland All rights reserved. If this documentation includes advice or information relating to any matter LIT-12011532 Issued June 17, 2013 Supersedes January 30, 2013 Refer to the QuickLIT website for the most up-to-date version of this document. Document To use this website, you must agree to our Privacy Policy, including cookie policy. Launch the VBE. Open the workspace module and modify the code. Test autosave by opening a log sheet, make a change then close it. Look in the folder containing the log sheet (typically the default save location) and you should find an HTML file containing the details of your log sheet. This service supports SNMPv1 and SNMPv2c. To configure the SNMP agent for use, an entry must be added to the registry after the SNMP service has been installed. To start the FTR SNMP Extension Agent, restart the SNMP service. The objects supported by the FTR SNMP Extension Agent all have the OID prefix 1.3.6.1.4.1.30409.1, which is the tree to FTRs Private Enterprise Number (PEN), and the FTR Gold 5.1 subtree. Contact FTR for a MIB file for ingestion to customer’s SNMP client.

One suggetsed item to watch for is un-archived data increasing beyond 1GB Note: The firewall must be disabled on the client machines, which are running the services you wish to monitor. Email SNMP Events FTR Gold supports email alerts through an SNMP client. You must first install an SNMP client and configure that client to detect and respond to events or errors that you are interested in. Some clients support email alerts and some support SMS alerts. For example. Change to installation folder. Launch Glossary2QN.exe with the command line described below. Glossary2QN,, Where: The glossary to convert (mandatory). e.g. G:Standard.LogNotesGlossary Output template file (optional). If not specified the template file uses same name as but with extension “FTRTemplate”. E.g G:Standard.FTRTemplate Conversion log (optional).Solution: - To re-enable old features: Before upgrading to FTR Gold 5.X, copy the file reservedkeys.txt from the installation folder to My Documents. Upgrade to FTR Gold 5.X with VBE enabled. Rename the folder Glossary Preserve to Glossary. Copy reservedkeys.txt from My Documents to the installation folder. Click Start, point to All Programs, FTR Gold and SDK then click Visual Basic Editor. See instructions in code. Change the bPickList function name. Save all changes and close the editor. Restart the program. Observe that the Glossary and Pick List options are now available from the Tools menu. More Information: This issue was diagnosed to be an issue with the Delta 1010LT driver. Solution: M-Audio has released an updated driver (6.0.5 - Driver: 5.10.0.5076) to resolve this issue. This can be downloaded from here.If you are affected by this issue please contact your FTR representative for information on updating to the latest version.They can be re-enabled using the following process. Solution: - Start the Visual Basic Editor using one of the following methods. Method 1: 1. Click Start, point to All Programs, ForTheRecord then SDK 2.

Click Visual Basic Editor.This applies to optical archiving in FTR Reporter and to any task in TheRecord Manager that requires saving content to an optical disc. The Microsoft Windows Feature Pack can be downloaded and installed. Solution Download and install the Windows Feature Pack. Exit FTR Reporter and TheRecord Manager. Log on as a member of the local Administrators Group.I assume you are both using Windows 7 and FTR Gold 5.4 as i have only ever heard of this happening on windows 7. Solution Browse to C:\Users\Yourusername\AppData\Roaming\FTR\GoldMain using windows Explorer Right click FTRSettings.xml and choose open with and select Wordpad You will see the following settings which represent where on the screen log notes opens, you will need to change the number in red -1057 310 if you change it to the following it should open on your main desktop in the top left hand corner 0 0 One this is done save the file and log notes should open on the screenMore Information: Applies to: FTR Reporter when first configured to archive to a warehouse. Technical Details: After adding FTR Reporter to a warehouse, FTR Reporter should save log sheets to the selected warehouse folder. If FTR Reporter is running at the time that it is added to the warehouse, then the save location is corrupted and is set to the desktop under a folder called “Public”. Solution: Close and restart FTR Reporter. On re-starting, FTR Reporter correctly reads the warehouse save location from the registry.Solution This answer applies to the conditions listed below and was first reported in the attached Product Defect Report. The underlying problem appears to be with a Microsoft device driver (USBSER.sys) however the workaround described here will assist until a there is a resoltion from Microsoft.